守望者--AIR技术交流

标题: FluidSolver 流体模拟类库 [打印本页]

作者: 破晓 时间: 2015-4-10 14:32
标题: FluidSolver 流体模拟类库
Building the Demos

Building the project has several steps, most of which can be streamlined if you're using FlashDevelop.

These are the fundamental steps to build the demos:

Use Crossbridge to build the C into a SWC
Build Worker SWC which wraps C code into a flash 'thread' (see bat/BuildWorker.bat)
Build/Run the Demos
Optionally, build the final SWC, which wraps the worker thread in a nice AS API (see bat/BuildSWC.bat)

Crossbridge build

If you don't modify the C code you won't need to do this step, as the SWC is included in the repo (clib/FluidSolverCrossbridge.swc).

Compiling the Crossbridge SWC involves the following steps:

Install Crossbridge SDK (tested on version 1.0.1)
Run Crossbridge using run.bat in SDK
Navigate to FluidSolver/clib directory
Run Crossbridge (the command should be printed in the comments at the top of the Crossbridge prompt), something like this:
- make FLASCC="/cygdrive/c/SDKs/Crossbridge_1.0.1/sdk" FLEX="/path/to/flexsdk"

Using FlashDevelop

When building the demos from FlashDevelop, everything except the Crossbridge compile is built into the project, it will automatically compile the worker SWC before compiling and the final SWC after compiling the demos.

[attach]1102[/attach]